off

Backed by an industry-leading 10-year warranty and lifespan, the HQST 12V 100Ah LiFePO4 battery is a reliable power solution for a wide range of applications—RVs, trailers, trolling motors, boats, off-grid cabins, and home backup systems.
Built with Grade A cells and an upgraded Battery Management System (BMS) featuring low and high-temperature cut-off protection, this lithium battery delivers safe, consistent performance. It also supports up to 4 batteries in series and 4 in parallel, allowing for easy system expansion to a powerful 20.48 kWh home battery bank (up to 16 batteries total). Plus, the integrated LED display keeps you informed of remaining capacity, voltage, and charge/discharge current—no more guesswork.
Important Reminders:
● 1. Ensure the battery terminals are securely fastened. Loose terminals can lead to heat accumulation and potential battery damage.
● 2. After a full discharge at a continuous 100A, avoid immediate recharging at 50A, as this may trigger high-temperature charging protection.
● 3. Optimal charging involves a 20A current for our lithium-ion battery. While the maximum charging current stands at 50A, exceeding this limit can result in a shortened battery lifespan.
● 4. How to Calibrate Screen Display:
● 1) Discharge the battery to 0%.
● 2) Use a compatible LiFePO4 battery charger or solar charge controller to fully charge the battery.
Read More
Read More
Read More
Read More
Read More
For RVs, Trailers
For Trolling Motors
For Home Backup Power
Specifications | |
---|---|
Model | HBT12100LFP-S48SC-G7-US |
Nominal Voltage | 12.8 V |
Energy | 1,280 Wh |
Rated Capacity (0.2C) | 100Ah |
Cycle Life (0.2C, 25±5℃) | 3,000 Cycles at 80% DOD |
Maximum Continuous Discharge Current | 100A |
Maximum Charge Current | Optimal: 20A; Maximum: 50A |
Max. Charging Voltage | 14.6V |
Discharge Cut-off Voltage | Lower than 11.1V |
Self Discharge Rate | 2% ~ 3% per month at 25℃/77℉ |
Over-Discharge Recovery Voltage | 12.6V |
Charging Temperature Range | 0℃~45℃ / 32℉~113℉ |
Discharging Temperature Range | -10℃~60℃ / 14℉~140℉ |
Low Temperature Protection | Charging: -5℃~+5℃ / 23℉~41℉ |
Discharging: -25℃ ~ -15℃ / -13℉~5℉ | |
High Temperature Protection | Charging: 60℃ ~ 70℃ / 140℉~158℉ |
Discharging: 70℃ ~ 80℃ / 158℉~176℉ | |
Storage Temperature Range | -20℃~45℃ / -4℉~113℉ (Store for 1-3 months) |
-20℃~20℃ / -4℉~68℉ (Store for 1 year) | |
Recommended Operating Temperature | 20℃ ~ 30℃ / 68℉~86℉ |
Terminal Bolt Size | Tailor-made M8 |
Internal Resistance | ≤10mΩ |
Weight | 10 kg / 22 lbs |
Dimension | 332 x 220 x 172 mm / 13.07 x 8.66 x 6.77 in (L x H x W) Compatible with the Group 31 battery case |
12V 100Ah Lithium Iron Phosphate (LiFePO4) Battery with Handheld Strap
M8 Bolts (A Pair)
10-year material and workmanship warranty
If the LED display isn’t showing the correct readings, you can try calibrating it by following these steps:
1. Discharge the battery completely to 0%.
2. Use a compatible LiFePO4 battery charger or solar charge controller to fully charge the battery.
If the issue persists, please contact us at sales@myhqsolar.com for further assistance.
The max. charging voltage is 14.6V and the max. charging current is 50A. For optimal charging performance, we highly recommend adjusting the voltage to 14.2V-14.6V and using a 20A charger.
Yes, it does. When the temp reaches -5℃~5℃, this lithium battery will stop being charged, and when the temp reaches -25℃~15℃, the battery will stop discharging. Ideal for harsh and rugged environments. It also has high temperature protection.
Yes, it does. When the discharge voltage is lower than 11.1V, the battery will shut off automatically.
We recommend using a lithium battery compatible AC to DC charger to charge LiFePO4 batteries, or else cause irreversible lifespan damage to the batteries. You can also charge these batteries using compatible solar charge controllers and solar panels.
Yes, it comes with two M8 screw terminals.
No, you should not connect the solar panel directly to the battery. When charging this battery with a solar panel, make sure to use a solar charge controller (either PWM or MPPT) between the panel and the battery. Directly connecting the panel to the battery could result in unstable solar power, which may damage your devices.