New 2000W & 3000W Pure Sine Wave Inverters Now Available Learn more
Popular Searches
1 9

HQST 60A MPPT Solar Charge Controller with Li-Ion Battery Low Temp Protection, Parallel Charging, and Bluetooth

SKU: HCC60HTR-PL-G1-US
$179.99 $305.99
Save   $126.00
Free shipping.

  • 【Low-Temp Cut-Off Protection for LiFePO4】The HQST 60A MPPT solar charge controller features low-temp charging (below 32℉) and discharging (below 5℉) cut-off protection for LiFePO4 batteries, preventing damage to your valuable batteries. You can manually switch on and off this function. The controller can also activate dormant LiFePO4 batteries that have turned off due to over-discharging.
  • 【Smart APP Control & LCD Display】With a built-in Bluetooth module, you can download the "ChargePro 2.0" (new version) or "PVChargePro" (old version) app for remote monitoring, which stores 300 days of historical data. The LCD screen and LED fault indicators allow you to check device operating data and modify controller parameters. Note: The Android version of the app requires location and Bluetooth to be turned on for connection.
  • 【High-Efficiency Charging】 The HQST 60A solar charge controller uses advanced MPPT technology to quickly and stably track the maximum power point, with a high tracking efficiency of up to 99% and a peak conversion efficiency of 98%. This maximizes energy from solar panels to charge your system. It auto-detects 12V, 24V, 36V, 48V battery system, with a maximum load output current of 20A. If the load exceeds 20A (240 watts), overvoltage protection will turn off the output.
  • 【Parallel Charge Function】Two HQST MPPT controllers (M2420N/M2440N/M4860N) can work together to charge the same battery pack using a parallel charge cable (not included), meeting high power charging requirements. Both controllers should be set to the same battery voltage. Our negative-grounded controller provides protection against overcharging, over-discharging, overload, overheating, short circuits, and reverse polarity, maximizing protection against system faults or installation errors.
  • 【Higher Heat Dissipation Efficiency & Full-Load Working】The die-cast aluminum heat sink enhances heat dissipation efficiency, minimizing power loss due to heat. The internal gel filling improves PCBA cooling conduction and protects against water and other damages, extending the controller's service life. Equipped with a premium IC and superior PCBA, this controller can operate at full load even in high-temperature environments.
Option
Quantity：
Payment Methods
Delivery Methods
Estimated delivery time: 2–5 business daysShipping Policy.
Description
Includes
Specs
Downloads
FAQ
Reviews

60A MPPT Solar Charge Controller

x 1

Temperature Sensor

x 1

User Manual

x 1

HQST 60 Amp MPPT Solar Charge Controller, 12V/24V/36V/48V Negative Grounded Controller, w/ Low-Temp Cut-Off, Bluetooth APP Control, LCD Display, for Gel Sealed Flooded and Lithium Battery

Specifications

Battery System Voltage
12V/24V/36V/48V
Rated Solar Charge Current
60A
Self-consumption
12mA/12V, 10mA/24V, 5mA/36V, 2mA/48V
Max PV Input Voltage
150V
Max PV Input Power
900W/12V, 1800W/24V, 2600W/36V, 3200W/48V
Operating Temperature
-31℉~113℉

HCC60HTR-PL-Manual

Download

Why is my controller flashing the error message E02?

It's normal that E02 flashes when the controller detects relatively high voltages. When a Li battery is fully charged, its BMS generates a relatively high volt (about 18V), then it will stop charging. This does no harm to your controller or battery.

Flashing load light with an E04 error message, now what?

E04 indicates that your appliance may have triggered the controller's short-circuit protection. Press the 'Return' key on the controller, or disconnect the appliance that's being powered, then the controller will resume normal work 30s later.

How to Connect Bluetooth (BT)

For Android Users: 1) Allow location first, 2) Tap the BT icon in the app, 3) Select PVChargePro.

For iOS Users: 1) Tap the BT icon in the app, 2) Select PVChargePro.

DC load stops working, What can I do?

Four Solutions For You:

  1. Set the load mode to 17.
  2. Check the indicators for abnormalities.
  3. Press the 'return' key on the controller.
  4. Open ChargePro2.0, enter the Real-Time Monitoring page, and turn off the DC Load Short-circuit Protection.

Reviews

Best Sellers