Solar Panel Extension Cable Pair (2 Cables) - Male to Female Solar Connectors
Solar Panel Extension Cable Pair (2 Cables) - Male to Female Solar Connectors - 10FT Each × 2 / 10 AWG is backordered and will ship as soon as it is back in stock.
Description
Do you need more space between your solar panels or between your solar panel and charge controller? HQST solar extension cable will allow you to make these adjustments to your solar power system in one simple step.
Sold as a pair: 1 pair includes 2 cables.
Package and Length Information
INCLUDES 2 CABLES: One matched cable pair for extending the positive and negative connections between solar panels and the PV system.
LENGTH IS PER CABLE: The selected length applies to each cable. For example, “15 FT Each × 2” includes two separate 15-foot cables—not one 30-foot cable.
Current Selection Guide
- 10 FT Each, 10 AWG: recommended for PV circuits up to 55A
- 15 FT Each, 10 AWG: recommended for PV circuits up to 55A
- 15 FT Each, 12 AWG: recommended for PV circuits up to 40A
- 20 FT Each, 12 AWG: recommended for PV circuits up to 35A
Current recommendations are based on one-way cable length and the provided cable-sizing chart. Actual system capacity must not exceed the lowest rating of the cable, connectors, fuse, charge controller, and applicable electrical requirements.
Key Features
- Hard plastic connectors at each end
- Female and male connectors
- Black wire sunlight resistant cable
- Extends and locks built-in cables
- TUV tested cable
- UV resistant and waterproof
Applications





Package Includes
- 1 pair (2 cables) of HQST Solar Panel Extension Cables
Specifications
| General | |
|---|---|
| Rating Voltage: 600/1000V | Temperature: -40°F to +185°F |
| IP 65 Protection | |
| 10AWG Solar Extension Cables | |
|---|---|
| Normal Cross Sectional Area of the Conductor (mm 2): 6.0 | Diameter of Wires in Conductor (mm): 3.02±0.08 |
| Min. Wall Thickness of Insulation (mm): 0.85 | Min. Wall Thickness of Sheath (mm): 1.08 |
| Number of Wires in Conductor: 84 | |
| 12AWG Solar Extension Cables | |
|---|---|
| Normal Cross Sectional Area of the Conductor (mm 2): 4.0 | Diameter of Wires in Conductor (mm): 3.02±0.08 |
| Min. Wall Thickness of Insulation (mm): 0.78 | Min. Wall Thickness of Sheath (mm): 0.97 |
| Number of Wires in Conductor: 56 | |
Warranty Information
|
Accessories: |
|
|
|














